DAD - DTF for Fabrics

READY TO PRESS TRANSFERS

TRANSFERS TO ANY TYPE AND ANY COLOR OF FABRIC!

PRESSING INSTRUCTIONS:

1. POSITION

   Take your time and line up your artwork in the desired print area

2. PRESS

   Cover your transfer with parchment paper or teflon sheet (parchment paper for a matte finish, or teflon sheet for a semi gloss finish). Press with medium pressure at 300^oF-320^oF for 12-15 seconds

3. COOL & PEEL

   Remove pressure and heat and let y our transfer rest for a minimum of 15 seconds. After letting your transfer rest and it is cool to the touch, lift the transfer film from one corner and gently peel back. Apply even pressure

4. FINAL PRESS

   After removing the film, cover the design with parchment paper and press again for 15 seconds. This final press is imperative to enhance the feel, increase durability and remove shine

LAUNDERING:

1. Turn your pressed shirt inside-out before washing

2. Separate similar colors, weight and textures. Make sure to not overfill washer

3. Use mild detergent with cold water on a gentle cycle

Warm water, harsh detergents and aggressive wash cycles can damage both garment and the transfer itself

HOW TO DRY:

We recommend hang-drying on a plastic hanger, but a drier works fine if you follow the steps below

1. Turn your pressed shirts inside-out before drying

2. Separate similar colors, weight, and textures

3. Use the lowest possible heat setting, or Permanent Press